Regulatory References; Product Disposal - Cressi DIGI 2 Manual De Instrucciones

EN
40
retailers or agents beyond the terms of this warranty.
No retailer or agent is authorized to make any changes to this
warranty or to grant an additional one.
For warranty repair, send the product, carriage forward, to your Cressi
Sub retailer or to an authorized Service Center. Provide your full name
and address, and enclose the purchase receipt or invoice.
You can find your authorized Cressi Sub center by asking your dealer
or Cressi Sub S.p.A. itself by sending an e-mail to:
info@cressi.com.
Cressi Sub assumes no responsibility for any work carried out by
personnel not authorized by Cressi Sub.
The instructions and directions found in this manual are based on
the most up-to-date information about the equipment available
before printing. Cressi Sub reserves the right to make changes to the
content at any time.

REGULATORY REFERENCES

This instrument is compliant with the requirements of Directive
2014/30/EU electromagnetic compatibility.
This instrument satisfies the requirements set by UNI EN 250:2014
(pressure gauges for diving and Category III PPE); the latter in
compliance with Regulation (EU) 2016/425, which sets out the
conditions for marketing and essential minimum safety requirements
for Personal Protective Equipment (PPE).
It therefore bears the CE marking followed by identification of the
certification authority 0474 identifying RINA, the registered testing
agency that conducted the testing and tests its manufacture pursuant
P80-DIGI 2.indb 40
to module B+C2 of EU Regulation 2016/425.
The certification is valid to 50m in depth, as defined by UNI EN
250:2014.
This device was designed to satisfy the requirements set forth under
standard UNI EN 13319:2000 regarding Depth Gauges and Combined
Depth and Time Measuring Devices.

PRODUCT DISPOSAL

Consider the device to be electronic waste.
Do not throw it away with regular rubbish.
Deliver it to the special dedicated municipal areas or return it to
Cressi Sub S.p.A.
13/06/19 14:01