Assembly - Airzone AZX6CSMASTER Manual Del Usuario

ASSEMBLY

SuperMaster controller is available in wall-mounted (AZX6CSMASTERS) or wall-embedded
(AZX6CSMASTERE) assemble.
Wall mounting
 Separate wall-support from thermostat.
 Fix wall-support either directly on the
wall or on a wall-embedded mechanism
box pulling out the cable through the
hole designed for it.
 Mount on the wall support the back
protection case of the controller pulling
out the cable through the hole designed
for it.
 Once connection is done, assemble display on the back protection case.
Embedded mounting
Embedded SuperMaster controller is designed for a screwed wall-embedded box of size 100x100.
Compatible brands are:
- Solera 362 (100x100 mm)
- Jangar 2174 (100x100 mm)
- IDE CT110 (100x100 mm)
- Fematel Ct35 (100x100 mm)
To fit a wall-embedded controller do as follows:
 Remove the trim-frame of the set.
 After connecting the wire, use the washer and screws to
fit it to the wall-embedded box.
 Place trim-frame ensuring that it is correctly fit.
ES
EN
FR
IT
PT
DE
19