Final Assembly Instructions - allen+roth LP7942LBZ Manual Del Usuario

WIRING INSTRUCTIONS
5. After connections have been made, turn the leads
upward and carefully push the power supply wire
leads into the outlet box, with the white and green
leads to one side of the box and the black leads
toward the other side.

FINAL ASSEMBLY INSTRUCTIONS

1. Remove one of the two preassembled shoulder
screws (KK) in the hanger bracket (B). Loosen the
second shoulder screw (KK) without fully removing
it. Rotate the ceiling canopy (D) so the second
shoulder screw (KK) moves into the small opening
of the keyslot on the ceiling canopy (D). Tighten
the shoulder screw (KK). Re-install the previously
removed shoulder screw (KK) to fully assemble
the ceiling canopy (D) to the hanger bracket (B).
For easy installation, a short Phillips screwdriver is
recommended.
WARNING: To avoid possible fi re or shock, make
sure the electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
Hardware Used
KK Shoulder Screw
5
1
x 2
13
KK
KK
Lowes.com/allenandroth
D