allen+roth LP7942LBZ Manual Del Usuario página 21

TROUBLESHOOTING
PROBLEM
The fan wobbles
excessively.
There is not enough
air movement.
POSSIBLE CAUSE
1. The set screw in the downrod
support is loose.
2. The set screw in the in
downrod/hanger ball assembly
is loose.
3. The screws securing the fan
blade holders to the motor hub
are loose.
4. The blade holders are not
seated properly.
5. The hanger bracket and/
or ceiling outlet box is not
securely fastened.
6. The fan blades are out of
balance.
1. The downrod is too short.
CORRECTIVE ACTION
1. Tighten the set screws securely in the
downrod support.
2. Tighten the set screw in the downrod/
hanger ball assembly.
3. Check to be sure the screws that
attach the fan blade holders to the
motor hub are tight.
4. Check to be sure the fan blade
holders seat fi rmly and uniformly to
the surface of the motor housing. If
holders are seated incorrectly, loosen
the screws and retighten.
5. Tighten the hanger bracket screws to
the outlet box, and secure the outlet
box.
6. Refer to Blade Balancing Instructions
on page 18.
1. If possible, consider using a longer
downrod (not included).
21
Lowes.com/allenandroth