DESCRIPTION
The RMN5104 Bluetooth Adapter is an accessory
designed to complement Radio Models PR1500,
XTS 1500, XTS 2500, XTS 5000 and HT1000.
OPERATION
Removing the Radio's Universal
Connector Cover
If the radio's universal connector cover is installed
on the radio, refer to Figure 1 and perform the
following steps:
1. Looking at the antenna side of the radio, insert
a flat blade screwdriver between the lower end
of the universal connector cover and the slot
below the universal connector.
2. Pry upwards on the cover's lower end until it
disengages from the radio.
Figure 1: Removing the radio cover
2