Intended Use - DeWalt DCD930 Manual De Instrucciones

2. Long storage will not harm the battery pack or charger. Under
proper conditions, they can be stored for 5 years or more.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.

INTENDED USE

These drills/drivers/hammerdrills are designed for professional
drilling and screwdriving applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These drills/drivers/hammerdrills are professional power tools. DO
NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
A. Trigger switch
B. Forward/reverse button
C. LED light G.
D. Chuck
E. Torque adjustment collar
F. Mode control collar
Gear shifter
H. Side handle (DCD950 only)
FIG. 1 D
C
B
H
Variable Speed Switch (Fig. 1)
To turn the tool on, squeeze the trigger switch (A). To turn the tool
off, release the trigger switch. Your tool is equipped with a brake.
The chuck will stop as soon as the trigger switch is fully released.
NOTE: Continuous use in variable speed range is not recommended.
It may damage the switch and should be avoided.
Side Handle (Fig. 1)
WARNING: To reduce the risk of personal injury, ALWAYS
operate the tool with the side handle properly installed. Failure to do
so may result in the side handle slipping during tool operation and
subsequent loss of control. Hold tool with both hands to maximize
control.
11
E F
G
DCD950
A