Apeman C570 Manual Del Usuario página 13

Motion detection: on/off. Default value: off.
It starts recording once it detects moving subjects within 3 meters in front
of the lens, otherwise it stops recording. It automatically starts recording
10s video and stops recording after no dynamic motion appears.
Record Audio: Choose to record audio or not in the video. On/off. Default
value: on.
Date stamp: on/off. Default value: on.
G-sensor: off/ Low/ Medium/ High. Default value: Medium.
The cam automatically locks video that is being recorded once it detects
shaking or collision. Files that are locked won't be overwritten/ covered.
System Settings
After being powered on, it enters the video mode and automatically starts
recording. Short press Menu Button to switch to video recording settings.
Short press Menu Button again to switch to system setting. The screen
displays the settings such as: Date/time, Auto Power off, Screensavers,
Beep sound, Language, Frequency, License plate stamp, Format, Default
setting, Version.
Date and time: You can set the display order of date and time, such as
Y/M/D. Press OK to enter, press Up or Down to change. After changing
each time, press OK button to switch to the next item. After all items are
changed, press Menu Button to save and exit. (After restoring the factory
settings, the date becomes the factory date)
Auto power off: Off / one minute / three minutes / five minutes. Default
value: three minutes.
Note: If there is no operation on the cam within the set time, the cam will
automatically turn itself off when the cam is not recording.
9