Apeman C570 Manual Del Usuario página 18

In the process of turning on/setting the cam
1. The cam can't be turned on
Solution:
A: Confirm whether the indicator of the power adapter is on or not. If
there is no light, please replug the car charger and ensure the power
supply of the cam.
B: The cam can not keep turning on for a long time. The built-in battery
can only be used for about 10-15 minutes. Please connect the cam to
cigarette lighter via the car charger in the package.
C: Press Reset button to reset the cam.
D: Because all of our products are transported to Amazon warehouse
from our factory and then fulfilled by Amazon. So products may stay in
the warehouse for a long time. When you receive the cam, please connect
the cam to power supply and fully charge them.
E: After being connected to power supply. The red light indicator on the
top left of the screen flashes once and then the cam will turn on. The blue
light indicator will keep on during your use. This can help you judge
whether the cam is supplied power normally.
2. The cam freezes. Screen goes black. Buttons do not work
Solution:
A: Check whether your card is class 10, 6-32GB, SDHC TF card
B: Long press the power button to force the shutdown to restart
C: Press Reset button to reset the cam
3. Unable to access menu settings(No response by pressing menu
button)
Solution: The cam will stay in video mode after being turned on and will
start recording automatically if you have inserted a SD card. Press OK
button to stop recording first. Then press menu button to enter settings
4. The screen goes blue and prompts mass storage
Solution: When you connect the cam to computer or power source with
low voltage, it is normal that the cam prompts mass storage. You should
use the USB cable in the package to connect the cam to power supply
with normal voltage.
14