Connections; Terminals And Connectors; Standard Connections; Bi-Wire Connections - Q Acoustics Concept Serie Manual Del Propietário

Connections

Terminals and Connectors

The Concept 300s are bi-wireable. A bi-wireable crossover has four
terminals. The upper pair of terminals connect to the treble (HF) speaker
and the lower pair to the bass (LF) speaker. The crossovers are pre-
fitted with removable links to connect the terminal pairs and configure
the loudspeaker in single–wire mode. This allows you to connect the
loudspeaker conventionally using one pair of cables.

Standard Connections

Connect the RED (+) terminal of the RIGHT loudspeaker to the RED,
Positive (+) terminal on the RIGHT channel of the amplifier.
Connect the BLACK (-) terminal of the loudspeaker to the matching BLACK,
Negative (-) terminal of the amplifier.
Repeat this procedure for the LEFT channel.

Bi-Wire Connections

To bi-wire: Prepare two twin cables for each loudspeaker. Unscrew all the
loudspeaker terminals and remove both links. Now connect the treble
terminals and the bass terminals to the amplifier following the procedure
described in standard connections. Refer to illustration above.
Standard Connections
Bi-Wire Connections
8