Silvercrest SDK 2500 B1 Instrucciones De Utilización Y De Seguridad página 19

Regularly check the power
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
Operation
The product must not be
left unattended while it is
connected to the supply mains .
Do not move the product while
it is in operation .
Do not place the product on
hot plates (gas, electric, coal
cooking range etc .) . Operate
the product on a level, stable,
clean, heat-resistant and dry
surface .
20 GB/IE
Do not cover the product while
it is in use or shortly after use,
when it is still hot .
Make sure that the power cord
is not pinched by the hotplates
or touches the rim of the
hotplates .
The use of extension cords is
not recommended .
If the use of an extension
cord is necessary, it must be
designed for a current flow of
at least 13 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .
The product is not intended
to be operated by means of
an external timer or separate
remote-control system .
When the product is in use,
ensure that there are no easily
flammable materials close to
the product (e .g . dishcloths,
oven cloths etc .) .