Eaton Metalux IB519013EN Instrucciones De Instalación

IB519013EN
Installation Instructions - Steeler LED Battery Pack
Instructions d'installation - Bloc-piles à DEL Steeler
Instrucciones de instalación - Paquete de baterías LED Steeler
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Eaton assumes no responsibility for claims brought
about by improper or careless installation or handling
of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
Battery Pack Installation
1. Mount luminaire and remote battery pack (use
hardware appropriate for the structure the battery is
installed, not provided with the fixture) (Figure 1).
2. Suspended luminaire a minimum of 12" from the
ceiling and position the battery pack off-center from the
fixture.
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Minimum 90° supply conductors.
NOTE: Specifications and dimensions subject to change
without notice.
Remote Battery Pack
Figure 1.
Brand Logo
reversed out of
black
INS # INS #
Review instructions provided by
the battery pack manufacturer
Hardware
(supplied by
others)