Unitech PA500 Enterprise PDA Guía De Referencia Rápida página 7

Turning the PA500 on for the First Time
After you have initially charged your device for about 16 hours, the device is ready to be
used.
1
Turn on your device by pressing the power button on the front panel.
The Unitech PA500 welcome screen appears. The Windows CE screen will appear
shortly thereafter.
2
Adjust the screen brightness by pressing the up and down arrow keys to decrease
or increase screen brightness.
3
Calibrate the PA500.
4
Follow all onscreen instructions to complete the set up.
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
6