Unitech PA500 Enterprise PDA Guía De Referencia Rápida página 8

Performing the first synchronization process
After completing the setup procedures you can now perform the first ActiveSync operation
with the help of the New Partnership setup wizard.
1
Install the Microsoft ActiveSync software to your PC. Refer to the PA500 Enterprise
PDA User's Manual for detailed installation instructions.
2
Connect the USB charging cable to the universal connector on the bottom of your
device (1). If necessary, connect an adapter.
3
Plug the other end of the USB charging cable into a USB port on your PC (2).
4
Turn the device on.
5
After ActiveSync should start atuomatically and recognize your PA500 and
configure the USB port. The New Partnership setup wizard will automatically start.
NOTE: If ActiveSync doesn't start automatically, click Start > Programs > Microsoft
ActiveSync.
6
Follow all onscreen instructions.
7
When the configuration process is complete, the ActiveSync window appears.
8
Synchronization will be initialized and will take place if you've chosen to
synchronize periodically or upon connection.
9
You can also set remote synchronization with your computer using the following
connection options:
• Infrared connection
• Bluetooth connection
• WiFi connection
For more information on how to use these options, refer to the PA500 Enterprise
PDA User's Manual.
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
7