Maschio GASPARDO Empleo Y Mantenimiento - Piezas De Repuesto página 50

4.4.1.5 Language
CONFIGURATION
Language (Fig. 20): selection of the language.
Select the required language using arrows
Press ESC to return to the previous menu.
The key indicated with letter A (Fig. 20) is used to update languages (operation carried out by
the After-Sales Service)
4.4.1.6 Motor Reminder
CONFIGURATION
Motor Reminder (Fig. 21): activating this function, a beep is emitted every time the seed drill
motor stops or is ignited; in particular one single beep is emitted when the seed drill motor
starts and two when it is stopped.
Select the Motor Reminder function using arrows
the function, use arrows
4.4.1.7 Pre-start
CONFIGURATION
Pre-start (Fig. 22): This function enables the seed drill motor when the machine is stopped (no
advancing speed), in order to allow the seed to fill the seed pipes.
The Pre-start (A, Fig. 22) time indicates the activation time of the seed drill motor during the
machine downtime; if no advancement speed is detected when this time has elapsed, the
motor stops. During the pre-start period, the motor is brought to a pre-set advancement speed
(called "simulated speed"). When the pre-start time is elapsing, the motor is brought to a speed
consistent with that of the advancement, if an advancement speed is detected.
The Pre-Start time can be set in the following way:
1) press OK (E, Fig. 1);
2) select the number to be modified using arrows
3) set the value using arrows
4) Press OK to confirm or ESC to cancel;
The function can be performed in two ways (B, Fig. 22), which can be activated by pressing the relative button under the icon (F,
Fig. 1):
Automatic mode: pre-start is managed from the display; for function details refer to Chap. 4.6.2
Manual mode: pre-start is managed by the user; it is activated by pressing the key (D, Fig. 1) indicated with letter "C" in
Fig. 22.
In both modes, the Pre-start time must be set as described above.
Attention: The Pre-start cannot be activated if the fan drive speed is lower than the minimum speed allowed.
Code G19503490
USE AND MAINTENANCE
OPERATOR CONFIGURATION
, press OK to confirm the selection (E, Fig. 1).
OPERATOR CONFIGURATION
; to activate (ON) or deactivate (OFF)
.
OPERATOR CONFIGURATION
;
Language
Motor
Reminder
Pre-start
;
Fig. 20
Fig. 21
Fig. 22
EN
- 13