Installing Windows - ASROCK AD2700B-ITX Manual De Instrucciones

2.8 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.9 Installing Windows

If you want to install Windows
below steps.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
20
ASRock AD2700B-ITX / AD2500B-ITX Motherboard
® 7 on SATA / SATAII HDDs
®
7 OS on your SATA / SATAII HDDs, please follow
Advanced screen
®
7 OS on your system.
Advanced screen
®
7 OS on your system.
Storage Confi guration.
Storage Confi guration.