Beper 50.002 Manual De Instrucciones página 9

EN
Ironing system with pressure gauge Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Some warnings
When it is on or cooling down, keep the iron and its cord out of reach
of children.
Before filling the appliance with water and before removing the remai-
ning water after use, disconnect the plug from the electrical socket.
The appliance must be used and placed on a stable, flat and heat-
resistant surface.
Do not use the iron if it has been dropped, if it has visible signs of
damage or if water is coming out. It must then be checked by an au-
thorized technical assistance service before using it again.
As soon as you have finished using the product, remember to discon-
nect the plug from the power supply. Do not leave the iron unneces-
sarily powered.
Do not open the fuel cap when the product is in operation.
After removing the packaging, check the integrity of the appliance, in
particular the power cord
Do not use adapters, multiple sockets and / or extensions, especially
in rooms used for bathing or showering.
Do not use the appliance if it is damaged in the power cord or plug.
Do not use the iron near water. Do not immerse the product in water
or other liquids,
If the appliance falls into water, disconnect the plug and remove it
from the water. Do not put the appliance into operation before having
it checked by an authorized technical service centre. This recommen-
dation also applies in the event that the power cord or the appliance
is damaged or if the appliance has fallen into the ground.
9