1. Unlike most other remote controls you may have
used, the 1999 must be turned on to be used as a
remote control to the humidifier. Likewise, when not
in use, we recommend the remote be turned off to
save the batteries.
2. Pressing the I/O button once will turn the remote and the
humidifier ON and take command of the humidifier.
If the humidifier is already on when the remote is turned
on, the remote will take command of the humidifier
controls and revert to the last settings used on the
remote control.
If the humidifier controls are adjusted while it is under
the Remote's command, the humidifier will take
precedence over the remote, and revert to the last
settings used on the humidifier.
3. After the remote is turned on, the remote display
will show - - as it calibrates. It will then display
the air temperature (in °F) and the relative
humidity (in %).
4. When the humidifier is under the command of the
1999 remote, the display on the humidifier will
show EC for External Control.
GETTING STARTED
COMMAND ORDER NOTE:
5