Essick 1999 Manual De Instrucciones página 7

Settings are entered into the remote control just as
they are on the humidifier itself.
1. Setting Humidity: Press the center (humidity)
button to increase the humidity. The humidity
setting will increase in 5% increments starting at
25%, progressing up to 65%*, then cycling back to
25%. The humidity setting displays on the lower
segment of the screen. After the setting is entered
and displayed momentarily, the screen will return
to showing the relative humidity.
2. Setting Fan Speed: Press the right hand button
to adjust the fan speed. Each push of the button
increases the speed ranging from F1 to F9, and
then cycles back to F1. The fan setting will
display on the lower segment of the display until
complete, and then revert back to relative
humidity setting.
NOTE: Periodically the remote performs a
frequency check and will be unresponsive to
input. Wait 5 seconds and try your input again.
* At 65% setting the unit will operate
continuously.
ENTERING SETTINGS
7