SAFETY AND SET-UP __________________________
Before using the appliance
7
for the first time, clean all
parts. Please see details in the
"Cleaning and care" section.
Dry the appliance and all
7
parts before connecting it to
mains supply and before at-
taching the parts.
Never operate or place any
7
part of this appliance on or
near to hot surfaces such as
gas burner, hotplate or heated
oven.
The bread can catch fire be-
7
cause of overheating. Never
use the appliance in or near
to combustible, inflammable
places, materials and furniture.
Do not let the appliance come
into contact with or become
covered by inflammable mate-
rials such as curtains, textiles,
walls, etc.
Do not use paper, cardboard,
7
plastic in or under the appli-
ance.
Use bread slices which are
7
suitable for the bread slots.
Operate the appliance with
7
delivered parts only.
Do not use the appliance with
7
damp or wet hands.
18 ENGLISH
Always use the appliance on a
7
stable, flat, clean, dry and non-
slip surface.
Make sure that there is no dan-
7
ger that the power cord could
be accidentally pulled or that
someone could trip over it
when the appliance is in use.
Position the appliance in such
7
a way that the plug is always
accessible.
Avoid contacting hot surfaces
7
as the outer casing becomes
warm during use. There is the
danger of burning.
Do not stick any foreign ob-
7
jects onto the appliance.
This appliance must not be op-
7
erated with an external clock
timer or separate remote con-
trol system.
When using for the first time,
7
smoke can develop due to
production residues. However,
this does not mean the appli-
ance is defective. The first time
you switch it on, use the appli-
ance as you normally would,
but without bread. Ensure for
proper room ventilation.