Rollei Smart ePano 360 Manual Del Usuario página 23

Operation
5 . Time-Lapse shooting: To take time lapse shots please go into the time lapse
mode of your smartphone's camera .
If you want to set the time lapse function directly on the head, press the time
lapse button once (repeatedly) to set the desired time . After that press the time
lapse button twice and the head will directly start to turn around within the
amount of time that has been set .
If you use the remote control the usage is completely the same as on the head
itself .
6 . Stop working: Press the time lapse button on the head or press the stop button
on the remote control to stop the panoramic head . You can stop the device at
any time . To turn it off press the head's on/off button for about 3 seconds .
Note: If you have stopped the panoramic head it will go into the standby mode
after 5 minutes, then the red and blue indicator light will flash alternatively. After
the device is in standby mode for about 3 minutes it will completely turned off
automatically. In standby mode press any button (on the remote or on the head) to
go in normal working mode.
23