Steelcase turnstone Bivi Manual De Instrucciones página 3

Place Half Round
Worksurface
3a.
Place half round worksurface on
brackets.
3b.
Make sure the support brace on
the underside of the worksurface
hooks into the brackets as shown.
Tighten Thumb Screws
4a.
Line up the hole in the brackets
with threaded insert on the bottom of
the worksurface.
4b.
Secure the half round
worksurface to the brackets using
the thumb screws.
2a
thumb screw
1a
View from underneath.
1b
Page 3 of 6
1059485001 Rev C