Maintenance / Service - Skil 3151 Manual Original

! when the lowest level of the
battery indicator starts flashing
after pressing button K 7 b, the
battery is empty
! when 2 levels of the battery
indicator start flashing after
pressing button K 7 c, the
battery is not within the
allowable operating temperature
range
• Battery protection
The tool is suddenly being switched
off or prevented from being switched
on, when
- the load is too high --> remove
load and restart
- the battery temperature is not
within the allowable operating
temperature range of -20 to
+50°C --> 2 levels of the battery
level indicator start flashing when
pressing button K 7 c; wait until
battery has returned within the
allowable operating temperature
range
- the battery is nearly empty (to
protect against deep discharge)
--> a low battery level or flashing low
battery level 7 b is shown by the
battery level indicator when pressing
button K; charge battery
! do not continue to press the
on/off switch after the tool is
switched off automatically;
battery may be damaged
• On/off 2
- press and hold button A for 1
second to turn on the speaker
- indicator D will start flashing
- press and hold button A for 3
seconds to turn off the speaker
! after approx. 45 minutes of
inactivity the speaker will
automatically turn off
• Volume
- use buttons F to increase or
decrease the volume
• Play/Pause
- use the Play/Pause button B to play
or pause a track
• Bass
- to add extra bass, press the Bass
button C
- to turn off the extra bass, press the
Bass button C again
• Connecting with Bluetooth
- turn on the speaker and it will
automatically enter into Bluetooth
pairing mode
- indicator D will start flashing
- the speaker will automatically try
to connect to the last device it was
paired to
- if no connection can be made,
the speaker will be available for
connection to other Bluetooth
devices for approx. 10 minutes
! after approx. 45 minutes of
inactivity the speaker will
automatically turn off
- when a connection is made, the
indicator will turn blue continuously
- to pair to a different device press
and hold the Bluetooth pairing
button E for 3 seconds
- indicator C will start flashing
! read the instructions provided
with your device
• Connecting with AUX 2
- open dust cover H
- plug in audio cable in the AUX port
J and connect to a MP3 player, CD
player or other audio device
- indicator D will turn blue
! without a connection the speaker
will automatically enter into
Bluetooth pairing mode
• Charging an external USB device 2
- open dust cover H
- connect a USB device with USB
charging cable to port G
! any device that uses more than
the maximum output current (see
technical data) will trip a self-
resetting overload protection and
disable the speaker, reactivate
by removing the USB device and
turn on the speaker
! when not in use, remove the
charger cable(s) and battery

MAINTENANCE / SERVICE

• This tool is not intended for
professional use
• Clean the tool with a dry, soft cloth (do
not use cleaning agents or solvents)
! remove battery from tool before
cleaning
10