Safety Symbols On The Product; Compliance Information - Tektronix TDS3CHG Manual De Instrucciones

Safety Summary
Safety terms on the
product
Safety symbols on the
product

Compliance Information

EMC Compliance
2
DANGER indicates an injury hazard immediately accessible as you read the
marking.
WARNING indicates an injury hazard not immediately accessible as you read
the marking.
CAUTION indicates a hazard to property including the product
This section lists the EMC (electromagnetic compliance), safety, and
environmental standards with which the instrument complies.
EC Declaration of Conformity – EMC. Meets intent of Directive 2004/108/EC for
Electromagnetic Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European Communities:
EN 61326-1 2006. EMC requirements for electrical equipment for measurement,
control, and laboratory use.
CISPR 11:2003. Radiated and conducted emissions, Group 1, Class A
IEC 61000-4-2:2001. Electrostatic discharge immunity
IEC 61000-4-3:2002. RF electromagnetic field immunity
IEC 61000-4-4:2004. Electrical fast transient / burst immunity
IEC 61000-4-5:2001. Power line surge immunity
IEC 61000-4-6:2003. Conducted RF immunity
IEC 61000-4-11:2004. Voltage dips and interruptions immunity
EN 61000-3-2:2006. AC power line harmonic emissions
EN 61000-3-3:1995. Voltage changes, fluctuations, and flicker
1 , 2
TDS3CHG Battery Charger Instructions