Tabla de contenido
Publicidad
User Information
Incline Adjustment
Remove Knob bolt M10
(25) and bolt. Align
bottom hole of rear
support with required
adjustment hole in main
tube. Refit Knob bolt M10
(25) and bolt to bottom
hole of rear support.
Decline Adjustment
Remove Knob bolt M10
(25) and bolt. Angle rear
support backwards and
lower upholstery to rest
on main tube. Refit Knob
bolt M10 (25) and bolt
to bottom hole of rear
support.
Flat Adjustment
Remove Knob bolt M10
(25) and bolt. Align upper
hole of Rear support
assembly (7) with 2nd
adjustment hole in Main
tube (1). Refit Knob
bolt M10 (25) and bolt
to upper hole of rear
support.
Publicidad
Tabla de contenido
