Publicidad
Step 16
Hold the BRACE (K) between the LOWER ENDS (B and D) clear
å
of all plumbing obstacles to determine which set of holes to turn
your CAM SCREWS (2) into.
Remove the BRACE and turn two CAM SCREWS (2) into each
å
of the set of six holes in the LOWER ENDS (B and D).
Insert four HIDDEN CAMS (1) into the BRACE (K).
å
You may need to slightly widen the LOWER ENDS (B and D) to
å
fasten the BRACE (K) to them. Tighten four HIDDEN CAMS.
Page 20
D
www.sauder.com
1
The arrow must
point toward the
edge of the board.
B
2
2
3
1
K
414573
Publicidad
