Maintenance/Care; Service - Warn 91810 Manual Del Usuario

* Plow Base, Plow Blade and Plow blade-raising mechanism sold separately. For complete plow system options, go
to www.warn.com for the complete line of plow accessories available.
• Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appear rusted or deformed prior to
use.
• Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts and bolts that appear
to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately.
• Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely. Store out of the weather be-
tween use to protect against corrosion, freezing and to keep operating smoothly.
1. Refer to these installation instructions for illustrations and detailed information on the installation, safe and proper operation and
assembly diagrams of your Universal Plow Mount. If you are unable to resolve the problem, then go to step 2.
2. Contact your dealer where you purchased your Universal Plow Mount Kit. If, after discussing the problem with their parts and
service staff, you are still unable to resolve the problem then go to step 3.
3. If you are unable to resolve the problem to your satisfaction, please call Warn Industries Customer Service at: 1-800-543-9276. You
may also contact Warn Industries by visiting our website: www.warn.com.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
©2013 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 14: *Complete mount assembly shown with push tube and plow blade installed.
M A I N T E N A N C E / C A R E
S E R V I C E
8 91853A1