WARNING:
missing, DO NOT attempt to plug in the
power cord, attach the battery, or operate
the tool until the broken or missing part is
replaced. Failure to do so could result in
possible serious injury.
WARNING:
ify this tool or create accessories not rec
ommended for use with this tool. Any such
could result in a hazardous condition lead
ing to possible serious injury.
WARNING:
be connected to the power source when
you are assembling parts, making adjust
ments, installing or removing application
tools, cleaning, or when it is not in use.
Disconnecting the tool will prevent acci
dental starting, which could cause serious
personal injury.
TO ATTACH THE
BATTERY PACK (FIG. 1)
FIG. 1
WARNING:
of accidental starting, always take care not
to activate the trigger switch when you are
attaching the battery pack or performing other
adjustments to the tool.
ASSEMBLY
If any part is broken or
Do not attempt to mod -
Your tool should never
OPERATION
Detach
Attach
To avoid the possibility
C
o
d r
e l
s s
a
n
g
e l
5"
grinding
manual.
-
1. Carefully remove the tool and any
accessories from the box. Make sure that all
items listed in the packing list are included.
-
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
-
satisfactorily operated the tool.
-
1. Make sure that the angle grinder is
turned off.
2. Align the raised rib on the battery pack
with the grooves on the bottom of the tool,
and then attach the battery pack to the
angle grinder.
NOTICE: When attaching the battery pack
to the tool, make sure that the raised plat
form on the pack aligns with the grooves
on the bottom of the tool and that the
latches snap properly into place. Improper
assembly of the battery pack can cause
damage to internal components.
TO DETACH BATTERY
PACK (FIG.1)
1. Make sure that the angle grinder is
turned off.
CONTENTS
r g
n i
d
r e
s ,
d i
e
h
a
n
l d
wheel
and
instruction
UNPACKING
, e
w
e r
n
c
, h
-
9
9