M7 DG-585 Manual Del Usuario página 5

10)Keep handles dry, clean, and free from oil and
grease. Slippery hands cannot safely control
the power tool.
11)Always wear safety glasses with side shields.
Everyday glasses may have impact-resistant
lenses, but they are NOT safety glasses.
Following this rule will reduce the risk of eye
12)Protect your lungs. Wear a face or dust mask
if the operation is dusty. Following this rule will
13)Protect your hearing. Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
4.POWER TOOL USE AND CARE
1) Do not force the power tool. Use the correct
power tool for your application. The correct
safely at the rate for which it was designated.
2) Do not use the power tool if the switch does not
turn it ON and OFF. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3) Disconnect the plug from the power source
and/or the battery pack from the power tool
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
4) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
6) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
7) Use the power tool, accessories, blades, etc.
in accordance with these instructions and in
the manner intended for the particular type of
power tool, taking into account the working
4
4
4
conditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
8) Hold power tools by the insulated gripping
surfaces when performing any operation in
which the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will also make exposed metal parts of the
tool "live" and can shock the operator.
9) Know your power tool. Read the product
manual carefully. Learn the applications and
hazards related to this tool. Following this rule
10)Save these instructions. Refer to them
frequently and use them to instruct others
who may use this tool. If you lend this tool
to someone else, also lend them these
instructions.
5.BATTERY TOOL USE AND CARE
1) Make sure that the switch is in the OFF
position before inserting the battery pack.
Inserting the battery pack into power tools that
have the switch ON invites accidents.
2)
manufacturer. A charger that is suitable for one
when used with another battery pack.
3)
designated battery packs. Use of any other
4) When the battery pack is not in use, keep it
clips, coins, keys, nails screws, or other small
one terminal to another. Shorting the battery
5) Under abusive conditions, liquid may be
liquid contacts eyes, additionally seek medical
cause irritation or burns.
6) Battery tools do not have to be plugged into
in operating condition. Be aware of possible
hazards when not using your battery tool or