Ryobi RHT2660DA Manual De Utilización página 17

GB
F D E
SPECIFICATION
PRODUCT DUAL RECIPROCATING
Engine Displacement ..............................................26 cc
Max Engine Performance (in Accordance
with ISO 8893) .................................................... 0.67 kW
Fuel Consumption (in Accordance with
ISO 8893) at Max Engine Performance .............. 0.51 L/h
Specifi c Fuel Consumption (in Accordance with
ISO 8893) at Max Engine Performance ........ 0.76 L/kW.h
Fuel Tank Capacity ................................................. 0.3 L
Blade Type ........................................Dual Reciprocating
Blade Length ......................................................... 60 cm
Max Cutting Capacity .......................................... 28 mm
Dry Weight............................................................5.34 kg
Vibration Level (in accordance with Annex
C of EN 774:1996+A1+A2+A3/prEN 10517:2003)
- Front Handle ................................................. 13.5 m/s
- Rear Handle .................................................. 21.0 m/s
Sound Pressure Level at Operator's Position
(in accordance with Annex D ofEN 774:1996
+A1+A2+A3/prEN 10517:2003) ......................96.5 dB (A)
Measured Sound Power Level (in accordance
with EN ISO 3744:1995 and
ISO 11094:1991) ..........................................107.4 dB (A)
Guaranteed Sound Power Level .....................113 dB (A)
DESCRIPTION
1. Scabbard
2. Guard
3. Front handle
4. Knob
5. Fuel cap
6. Primer bulb
7. Rear handle
8. Trigger lock
9. On/Off switch
10. Trigger
11. Starter grip
12. Blade
13. Choke lever
14. Latch
ASSEMBLY
WARNING
If any parts are missing do not operate this
tool until the missing parts are replaced.
Failure to do so could result in possible
serious personal injury.
I P NL S DK N FIN GR HU CZ RU
English
2
2
OPERATION
MIXING THE FUEL
This product is powered by a 2-stroke engine and
■
requires pre-mixing petrol and 2-stroke lubricant.
Pre-mix unleaded petrol and 2-stroke engine
lubricant in a clean container approved for petrol.
14 14
RO PL SLO HR TR EST LT
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with
this tool. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious
personal injury.
WARNING
To prevent accidental starting that could
cause serious personal injury, always
disconnect the engine spark plug wire from
the spark plug when assembling parts.
CAUTION
Any attempt to start the engine without
adding lubricant will result in engine failure.
WARNING
Petrol and its vapors are highly flammable
and explosive. To prevent serious personal
injury and prop-erty damage, handle petrol
with care. Keep away from ignition sources,
handle outdoors only, do not smoke while
adding fuel, and wipe up spills immediately.
WARNING
Do not allow familiarity with this product
t o m a k e y o u c a r e l e s s . R e m e m b e r
that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety
glasses with side shields when operating
power tools. Failure to do so could
r e s u l t i n o b j e c t s
i n t o y o u r e y e s ,
possible serious injury.
WARNING
D o n o t u s e a n y
accessories not recommended by the
manufacturer of this product. The use of
attachments or accessories not recommended
can result in serious personal injury.
(Fig. 2)
LV SK BG
b e i n g t h r o w n
r e s u l t i n g i n
a t t a c h m e n t s o r