SOUNDMASTER SCD5800 Manual Del Usuario página 14

During the playback of an audio CD:
Press once = the current track is repeated continuously. The display will show the "REP" logo.
Press twice = the whole CD is played continuously. The display will show the "REP" logo +
"ALL".
Press three times = all tracks will be played in random order. The display will show "RAND".
Press four times = back to the normal play mode.
During playback of MP3 music (Under USB and CD-MP3 mode):
Press once = the current track is repeated continuously. The display will show the "REP" logo.
Press twice = the selected folder is repeated continuously. The display will show the "REP" logo
+ "ALBUM".
Press three times = the whole CD is played continuously. The display will show the "REP" logo
+ "ALL".
Press four times = all tracks will be played in random order. The display will show "RAND".
Press five times = back to the normal play mode.
PRE. /FOLDER
Use the "PRE.+ / FOLDER+" button to chose the folder.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the "STOP" button.
2. Press the "SCAN / PROG" button. "P_01" will start to flash.. P_01 means the storage space
Use the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons to select the desired track and
then press the "SCAN /PROG" button again.
The display "P_01" will be changed to "P_02".
3. Select the next track with the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons and press
the "SCAN /PROG" button again. Repeat the procedure until all the desired tracks are
selected.
NOTE: Once the storage capacity of the tracks to be programmed has been reached
"PROGFULL" will show in the display.
4. Press the "PLAY / PAUSE / CLOCK" button. The playback starts.
The lower-left of the display will show "PROG".
5. Press the button to interrupt the playback while retaining the program.
6. To play the programmed back again, press the "PLAY / PAUSE / CLOCK" button.
7. To delete the program, press the "STOP" button twice. The notification "PROG" will
disappear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in MP3 format. The device also
supports all standard CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on
these CDs. Your machine detects an MP3 CD automatically (the total number of tracks and
MP3s appears in the display). If you would like to play one of these CDs, proceed as described
under "Playing CDs/MP3". Tracks can be programmed as described under "Playing Back
Programmed Tracks".
SCD5800 / English Instruction Manual
5