RoboCam ZC15 E Guia Del Usuario página 2

ROBOCAM
With the Xcam 2 kit, it is already possible to transfer pictures and sound to a TV set
or a monitor, with high quality resolution, even through walls and ceilings. The
ROBOCAM accessories increase the Xcam 2 flexibility to its maximum : they
allow to move a camera from left to right, up to down, in order to cover 240°. With
the remote control, the user can remotely move the position of the camera to monitor
whatever he wants, and he can store up to 4 preset positions, ideal when he is
away.
Before starting the installation, please read completely this user guide. If you have
any question regarding your ROBOCAM, please contact your reseller.
1. Guarantee
Conform use
The kit should be used in an inner dry room only. Avoid extreme temperatures.
The power is provided by the supplied power supply, use only this one.
Correct using
To avoid lightning damages, the device must be disconnected in case of storm.
Limits of guarantee
The appliance must not be changed or dismantled. Defective pieces must be
replaced by original parts. Any operation on the appliances must be done by qualified
technicians.
These products can be plugged only in 230 volts sockets.
In case of damages due to a non-respect of the user guide, the guarantee does not
apply.
Page 1