Toro Flex-Force Power System 60V MAX Manual De Instrucciones página 12

4
Installing the Strap
Parts needed for this procedure:
1 String trimmer strap
Procedure
If you are using the machine with battery Model 81860
or 81875, a string trimmer strap is recommended.
Connect the metal hook on the shoulder harness to
the strap collar on the string trimmer handle
1. Strap adjuster
2. Metal strap hook
The strap length is adjustable; slide the strap adjuster
up to decrease the length of the strap, or down to
increase the length of the strap
(Figure
Figure 4
3. Strap collar
4. Shoulder strap
(Figure 4).
If there is ever an emergency and you need to rapidly
remove the harness, disconnect the quick-release
buckle as follows:
1. Press in on the sides of the buckle (A of
5).
2. Allow the buckle to disconnect (B of
4).
g340943
10
Figure
Figure 5
Figure
5).
g340477