Step 3 Connect the main end of the
connection hose to the outlet of main unit.
Step 5 Put on the sleeves.
CAUTION:
The connection hose cannot place on the neck
to avoid strangulation or injure the neck.
Step 7 Set the pressure by rotating the knob
clockwise to increase and anticlockwise to
reduce.
Note: for first time use, it had better start with
the pressure not too high, maybe 120 or 150
mmHg, and then could adjust the pressure to
the level that makes you feel comfortable.
CAUTION:
Do not unzip the sleeve(s) during the treatment. This may cause damage the sleeve(s).
Always turn off the device before unzipping.
Had better not disconnect hose from the sleeve frequently to ensure the connection tight.
Ficheiro No.: FSHF-FO3001
Step
4
Check
connections to the main unit and sleeve
firmly.
Step 6 Set the power button on "I"
position to turn on the machine.
Note: Set the power button on "O"
position to turn off.
Step 8 Set the time by turning the knob
clockwise to start inflation and increase
the time.
Note: time range is 10~30 minutes. if
you turn the knob to "Always On"
automatic
power
Therefore,
the
switched off manually.
30
Version: A/1
and
ensure
all
off
is
disabled.
machine
must
be