14 INFORMATION ON ELECTROMAGNETIC COMPATIBILITY (EMC)
5) This product needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information below, and
this product can be affected by portable and mobile RF communications
equipment.
6) Do not use a mobile phone or other devices that emit electromagnetic fields
near the product. This may result in incorrect operation of the product.
7) This product has been thoroughly tested and inspected to assure proper
performance and operation!
8) This machine should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this machine
should be observed to verify normal operation in the configuration in which
it will be used
Guidance and manufacture's declaration – electromagnetic emission
FO3001 is intended for use in the electromagnetic environment specified below. The user
should assure that it is used in such an environment.
Emission test
RF emissions CISPR 11
RF emission CISPR 11
Harmonic emissions IEC
61000-3-2
Voltage fluctuations/ flicker
emissions IEC 61000-3-3
Compliance
Electromagnetic environment – guidance
Group 1
Its RF emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
Class B
FO3001 is suitable for use in all establishments,
including domestic establishments and those
Class A
directly connected to the public low-voltage power
supply network that supplies buildings used for
Complies
domestic purposes.
34
Ficheiro No.: FSHF-FO3001
Version: A/1