ECRON SM-32E Manual Del Usuario página 43

Idiomas disponibles

1. Place the FAN on a stable ﬂat surface. Plug the cord set

into a 220-240V. electrical outlet.

2. POWER: Turn the FAN on by pressing the 'POWER' but-

ton,it will start up with Medium in 3 seconds and then work

with Low. T urn the FAN off by pressing the 'POWER' button

again.

3. SPEED: You can adjust the fan speed to the desired level:

Low, Medium, or High by pressing 'SPEED'. The speed

setting is displayed on the LED screen.

4. MODE: Pressing the 'MODE' button will set the FAN into

NORMAL, NATURAL, and SLEEP mode by cycle type

selection. The mode is displayed on the LED screen.

1) Normal mode: the fan operates in a conventional way at

the selected speed without change as long as no button is

pressed.

2) Natural mode: Natural setting are high,medium or low

depending on fan speed selected. T he speeds are descri-

bed as below:

a. Low Natural Wind- The wind settings will repeat the

following 90 seconds wind cycle with Low speed being the

most common.

Tabla de Contenido