Appliance Cleaning; Troubleshooting - Fimar GYR60 Uso Y Mantenimiento

APPLIANCE CLEANING

To clean the appliance (at the end of the day or when necessary) TURN OFF THE
GAS SUPPLY and let cool.
– Accurately clean the work surface and all surrounding areas.
– Clean external appliance surfaces with a damp cloth or sponge.
Caution - Precaution
Only clean with food safe detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
In the event of prolonged appliance disuse, TURN OFF THE GAS SUPPLY and, after
cleaning, adequately protect it to keep it clean.

TROUBLESHOOTING

GB
The purpose of the following information is to help the operator to identify and correct
any anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abil-
ities and must only be performed by qualified personnel with recognised experience in
the specific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 4: Operating malfunctions
Problem
Gas odour
The pilot light does not turn on
The pilot light does not remain
on
Translation of the original instructions
Causes
Temporary leak when flame is
extinguished.
The piezoelectric switch does
not work
The thermocouple is not
sufficiently heated
- 18 -
GYROS (GAS POWERED)
Solutions
Close the supply faucet and
ventilate the room
Check piezoelectric switch
efficiency.
Manually ignite the flame
Contact your dealer or
authorised service centre.
Insist with the ignition operation
longer
English language