Pur Line DRYOS HEPA Manual Del Usuario página 12

BEFORE FIRST USE / FILTER REPLACEMENT
1. Pull and lift the filter cover on
side of the front shell.
4. Inser the filter into the appliance.
Notice:
1- Turn off and unplug.
2- Ensure the handle of the filter is on the outside.
3- Replace the filter with the one designed for this product.
USE
This dehumidifier combines the functions of dehumidification and purification, providing two working modes
for users to enjoy fresh air and suitable humidity in the meanwhile.
Full Water Tank
- When the water tank is full, the unit will be auto-off and its indicator light will change
to red and keep flashing.
- Put the water tank back to the unit after pouring the water to restart.
Reminder For Replacing Filter
- When the device detects that the filter runs out, the air purifier indicator will change to orange and keep
flashing.
- Press the purification button for 7 seconds to reset after replacing the filter.
Low-temperature dehumidifier
- The running temperature for the device is 5ºC to 50ºC, when the temperature is above 5ºC, the unit will
continue to work.
EN
2. Remove the filter.
10
3. Remove the packaging of the
filter.
5. Put the filter cover back on the
device:
Lock the bottom of the filter cover
in the bottom of the front shell.
Then push the cover towards the
body of the device.
6. After replacing the filter, please
turn on the device and press the
purification button for 7 seconds
to reset.