Cleaning And Maintenance; Water Tank - Pur Line DRYOS HEPA Manual Del Usuario

After the unit connects with power, the power Indicator will turn on.
Purification Button
- Press the button, the purification indicator will turn on, the device will start working with air purification.
- Press it again, the device will turn off.
Dehumidification Button
- Press this button when the device is turn on, the device will dehumidify with purification function on.
- Press again, the dehumidification function and its indicator light will turn off, the purification function and its
indicator will keep operating.
Mode Button
- Press the button to set modes when the purification function turns on.
- You can set three modes circularly: High-Mid-Low grade. The corresponding indicator will turn on.
METHODS OF POURING WATER
1. The water tank has maximum capacity of 1000ml with 750ml per day
working capacity.
2. The device will auto-off when the water tank is full, the indicator light
will turn on.
3. Please turn off the machine when water tank is full, pull out the water
tank, and then put it on a horizontal place. Opening the water tank cover
with upright direction and pour the water.
4. Please reset the water tank and restart the machine after pouring the
water.
5. Do not move or destroy the water tank float, otherwise the unit will not
work or it can cause other unnecessary breakdowns.
Notice: Please open the tank cover according to the fig. 1, then pour the
water.

CLEANING AND MAINTENANCE

ATTENTION! Unplug the appliance before cleaning or maintenance.
The lifetime of the filter differs based on indoor environment, usage times and usage location.
Suggested time of changing filter: about once a year.
To improve the efficiency, please purchase the filter suggested by PURLINE.
Do not use harsh chemicals for cleaning.
No water on the control panel.
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse
directly with water.
FILTER
- Clean the filter regulaly.
- Please sterilize the filter under sunlight regularly.
- Do not use a vacuum cleaner to dean the filter or wash it directly.
- Do not rinse with water or soak the filter.
- Use a soft brush or dry cotton cloth to clean the surface of the filter.

WATER TANK

Clean the water basin with soft cloth and the vinegar if there is dirty in it.
Rinse the water basin with clean water and let dry.
Store the device in a dry, dust-free place out of direct sunlight.
EN
11
fig.1