Overmax X-bee 9.5 Manual De Usuario página 36

Quick take-off/landing
Press the key (11) to switch between quick take-off and landing modes.
EN
Return
Press the return key (2) to make the drone return to the designated spot
(„home"). Press the key again to cancel the command.
Lock
Press (6) to switch motors off. Hold this key to unlock and switch motors off.
Speed change
Hold the key (12) to change the drone speed - high or low.
GPS / ATTI
Change key (14) setting:
OFF – ATTI mode
ON – GPS mode.
Camera angle (fig. 4)
Use a knob (13) to change the camera angle.
Display icons (fig. 5)
A – Return „home" icon
This icon remains visible until the drone successfully returns to the previously
specified spot.
B – Drone battery status
It shows drone battery status.
C – Distance from „home"
It shows a distance between the drone and spot previously marked as „home".
D – Height from „home"
It shows height between the drone and spot previously marked as „home".