Overmax X-bee 9.5 Manual De Usuario página 47

The drone uses 5GHz Wi-Fi. Make sure your device with application supports
this standard, otherwise you will not be able to connect to the drone.
Controller status indicators
Controller status
1
Signal strength indicator switches
between strong and weak.
2
Controller light indicators flash
slowly, the remote control emits
a sound, and battery indicator
flashes on the LCD screen.
3
Battery indicator is as follows:
dadditionally it emits a sound.
4
Battery indicator is as follows:
and the device emits a constant
long sound.
5
The signal strength on the display
shows fewer than two points or
shows no point, the device emits
a constant long sound.
Description
Controller loses signal.
Flat battery of the controller,
you have to charge it.
The drone battery goes flat
,
gradually. If the drone flight
altitude exceeds 30 meters
and the distance between
the drone and controller
exceeds 100 meters - the
drone will return to the spot
marked as „home".
Drone battery is flat.
The drone will return
automatically if its altitude
exceeds 15 m or its distance
exceeds 15 m. If the distance
is lower, the drone will land
instantly.
1. Distance between the
drone and remote control
is too long, which affects
the signal quality.
2. Drone battery has been
removed after pairing
with the remote control.
EN