Moulinex CHA141 Manual Del Usuario página 6

- Never place the appliance, the power cord or
the plug in water or in any other liquid.
- Do not allow the power cord to hang down
within reach of children.
- The power cord must never be close to or in
contact with the hot parts of your appliance,
close to a source of heat or resting on sharp
edges.
- The power cord cannot be replaced; if it is
damaged the appliance must be thrown
away.
- For your own safety, you should use only the
Moulinex accessories and spare parts which
are suitable for your appliance.
- Your iron is fitted with a thermal safety device
which will break the electrical circuit if there is
a fault.
- Never leave your iron unsupervised when it is
plugged in.
- Unplug the iron:
. before filling the water tank
. when you have finished ironing and for any
maintenance.
- Do not unplug the appliance by pulling on the
power cord.
- All appliances are subjected to strict quality
control. A few practical user tests are
performed with appliances selected at
random, which is why there may be slight
traces of use.
using your appliance
Position of the handle during use: simply
raise the handle. The button (I) locks
automatically and the handle is fixed.
Position of the handle for storage: press the
locking button
automatically.
Use:
- Fill the water tank with tap water.
- Plug in the iron.
- Set the thermostat button according to the
fabric to be ironed. The temperature control
light (G) goes out once the right temperature
has been reached.
Ironing Types of textile
instructions
Synthetic fibres: acrylic,
polyamide, polyester
Artificial fibres: viscose
Natural animal fibres:
wool, silk
Natural vegetable fibres:
cotton
thick cotton, linen
Warning: Do not iron this article.
. Steam/Pressing: Set the thermostat button
(H) to the steam range and press the
steam/pressing control button (D) at a rate of
not more than once a second.
. Spray: Press the spray control button (C) in
pulses.
Remember:
- Empty the water tank after each use and
when transporting the iron.
What to do if your appliance
does not work?
- Make sure the voltage switch (J) is in the
right position.
- Check the electrical connection.
If you have followed all these instructions
and your iron still does not work, or you need
6
(I): the handle drops
Thermostat
.
..
...
MAXI