Technical Data; Definitions: Safety Guidelines; Safety Instructions; English (Original Instructions) - DeWalt D25303DH Traducción De Instrucciones Originales

DUST EXTRACTION SYSTEM
D25303DH
Congratulations!
You have chosen a D WALT tool. Years of
e
experience, thorough product development and
innovation make D WALT one of the most reliable
e
partners for professional power tool users.

Technical Data

Contact pressure
Max. stroke
Max. drill diameter
Voltage

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.

Safety Instructions

WARNING! Always observe safety
regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating the
attachment. Also refer to the manual of any power
tool that will be used with this attachment.
SAVE THIS MANUAL FOR FUTURE REFERENCE
D25303DH
N 60
mm 125
mm 16
V 18
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Keep children away.
Do not let children come into contact with the
tool or extension cord. Supervision is required
for those under 16 years of age.
3. Use appropriate tool.
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended.
WARNING: The use of any accessory
or attachment or performance of any
operation with this tool, other than those
recommended in this instruction manual
may present a risk of personal injury.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DUST EXTRACTION SYSTEM
D25303DH
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1.
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of D WALT.
e
Marcus Rompel
Vice President Engineering
D WALT, Richard-Klinger-Strasse 11,
e
D-65510, Idstein, Germany
01.03.2015
WARNING: To reduce the risk of injury,
read the instruction manual.
english
WALT at the following
e
15