ND 1200R Radial
Installation Instructions
Operating Instructions available at www.heidenhain.de
2. Model information
This guide covers multiple products. Whenever possible the product name shown on
the cover page is used. When a feature pertains to a specific product variant the specific
product name or the product name and the ID are shown. In some cases an "x" is shown
in the product name to represent the described feature is available on multiple product
variants and types.
This guide covers specifications, mounting and installation for the following models:
Product name
ND 120xR Radial
Notice
Verify that these Installation Instructions are valid by matching the Index on the
label 1 with the Index listed at www.heidenhain.de. If these instructions are not
valid, download the applicable Installation Instructions from www.heidenhain.de.
An index may not be present on all products.
3. Safety
The following messages provide safety information for preventing personal injury and
product damage:
Read and understand these instructions before use to avoid the possibility of
personal injury or death.
Hazardous live parts may be exposed if the unit is opened. Do not open the
unit. There are no serviceable items inside.
The protection provided by the equipment may be impaired if used in a manner
not specified. Do not use this product in any way other than its intended use.
Notice
For safety, operation and handling of the unit, keep this document for future
reference. This document must be kept within reaching distance of the product.
12
ID
676485-xx
ND 120xR
1
Radial
Product name
ID 123456-xx
SN 12 345 678 x
ID
Index
ID label
Safety symbols
Where the following safety symbols
appear on the product they alert you to
important safety information.
Symbol description
Refer to the accompanying
2
information or
documentation to protect
against personal injury or
damage to the unit
Earth (ground) terminal
6
Power switch "On (supply)"
3
position
Power switch "Off (supply)"
3
position
xx