On/Off Switch; Connection Panel (Lun 15Ma - Lun 12Ma Lun 10Ma - Lun 8Ma) - My Audio LUNARIS Serie Manual De Instrucciones

- LUNARIS ACTIVE SERIES -
7. SHIELD
Control for separating the electrical earth from that of the chassis: under certain conditions, the SHIELD selector can
enable to break earth loops and to eliminate hum or other annoying noises.
8. ON/OFF LED
This LED glows when the unit is switched ON.
Note: it is normal for this LED keep glowing for a few seconds when the units is switched off.

9. ON/OFF SWITCH

10. POWER SUPPLY SOCKET or MAINS CABLE
7. CONNECTION PANEL...................................................Fig. 4
LUN15 MA - LUN12 MA - LUN10 MA - LUN8MA
LUNARIS Active monitors offer the same features we explained before speaking about loudspeakers, but they enable to
select 4 different types of equalization in the form of PRESETS:
▻ STAGE 1 - STAGE 2 - STAGE 3: these 3 PRESETS give an effective linear response, suitable for LIVE stage monitoring
or for any other applications that require an answer in neutral frequency response.
▻ VOICE: this PRESET can be used when a dynamic microphone is connected directly to the monitor. The PRESET includes
an equalization that enables you to get from the microphone a clear and understandable frequency response, without
using any mixer.
www.myaudio.it LUNARIS ACTIVE