Controls And Functions - Lenco L-3808 Manual Del Usuario

CONTROLS AND FUNCTIONS

1
2
3
4
5
6
1. EP ADAPTER
This adapter allows you to play standard 7" EP vinyl records with large center holes. Place the adapter on
the CENTER SPINDLE 7" records.
2. STROBE INDICATORS
The PLATTER has four rows of indicators. These indicators are used to visually detail various stages of
pitch. The indicators are illuminated by the STROBE INDICATOR PILOT LAMP. Each row may appear to
stand still at different pitch levels.
Note: The use of heavy fluorescent lighting directly above the turntable will defeat the STROBE LAMP
PILOT LAMP affect indicator accuracy.
3. CENTER SPINDLE
This spindle holds the turntable PLATTER records stable and centered.
4. STROBE INDICATOR PILOT LAMP
This is lamp specially designed to pulse a beam of light at the STROBE INDICATORS on the turntable
PLATTER. This will give the illusion that indicators are not spinning at certain speeds.
5. POWER SWITCH
This is a rotary power switch. To turn main power on turn the switch in a clockwise direction. To turn main
power off turn the switch in counter-clockwise direction.
6. START/STOP BUTTON
This over sized push button controls platter motion. When the unit is turned on the platter will not
automatically begin to spin. Pressing the button once will engage the high torque motor and spin the platter,
pressing this again will stop the platter.
7. STYLUS HEADSHELL
The included HEADSHELL is used to connect your stylus with the tone arm.
8. HEADSHELL LOCKING NUT
After attaching the headshell to the tonearm, this locking nut will securely hold the headshell to the
tonearm.
8
19 20 21 22
8 9
7 10 11
18
17
16
15
14
13
12