Location Of Controls - Lenco TCD-974 Manual De Instrucciones

Tocadiscos con cd/mp3 radio pll y codificación usb/sd
Tabla de contenido

Publicidad

LOCATION OF CONTROLS

1) DUST COVER
2) LCD DISPLAY
3)
RECORD BUTTON
4) FUNCTION BUTTON
5) POWER ON/STANDBY BUTTON
6) PRESET EQ BUTTON
7) MEMORY/CLOCK-ADJUST BUTTON
8) REP/INTRO/RAN BUTTON
9) 3.5MM HEADPHONE JACK
10) USB SOCKET
11) SD/MMC CARD SLOT
12) CD TRAY
13) BAND/STOP
BUTTON
14) PLAY/PAUSE
15) FOLDER/PRE-UP BUTTON
16) REMOTE SENSOR
17) TUNING/SKIP UP
18) CD TRAY OPEN/CLOSE BUTTON
19) VOLUME KNOB
20) SPINDLE ADAPTOR
21) TURNTABLE SPEED SELECTOR
22) AUTO STOP SWITCH
23) PICK-UP HOLDER
24) LINE OUT SOCKET (L/R)
25) FM ANTENNA
26) AC CORD
27) BUILT IN SPEAKER SWITCH
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS SUCH AS NEWSPAPER, CLOTHS AND CURTAIN AND MAKE SURE THAT
THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD NOT BE PLACE IN THE APPARATUS.
THE USE OF APPARATUS IN TROPICAL OR MODERATE CLIMATED.
WHERE THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, THE
DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE
THE APPARATUS SHALL NOT EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
HIGH VOLUME LEVEL FROM EARPHONE AND HEADPHONE CAN CAUSE HEARING LOSS.
THE NORMAL FUNCTION OF THE PRODUCT MAY BE DISTURBED BY STRONG ELECTROMAGNETIC
INTERFERENCE. IF SO, SIMPLY RESET THE PRODUCT TO RESUME NORMAL OPERATION BY
FOLLOWING THE INSTRUCTION MANUAL. IN CASE THE FUNCTION COULD NOT RESUME, PLEASE
PLACE THE PRODUCT IN OTHER LOCATION.
CONNECTION
1.
CONNECT THE POWER CORD (26) TO AC OUTLET.
2.
PRESS THE POWER BUTTON (5) THE LCD DISPLAY (2) LIGHT UP WITH BLUE BACKLIGHT. NOW YOUR
SYSTEM IS READY TO PLAY THE MUSIC.
/ST/MOBUTTON
/ DOWN
BUTTON
GB- 1

Publicidad

Tabla de contenido
loading

Tabla de contenido