LG LSG4513 Serie Manual Del Propietário página 59

Problem
• Knobs melt
• Oven or racks are
stained after using
aluminum foil
• Flame or power is
weak
• Surface is not level
• Oven is tipping
• Oven shows error
code (F9, F19) but
cooktop burners are
working.
Cause
Improper usage
Aluminum foil has melted in the oven
Gas pressure may be weak
1. Range not leveled
2. Anti-tip device not installed correctly
Screw must
Level both sides of range
enter wood or
concrete
Approximately
0.65"
(16.5 mm)
2
1
The gas pressure regulator valve is closed.
Lever's closed position
Anti-tip bracket
Wall plate
Use carpenter's level to
check level.
WARRANTY
Prevention
• Do not leave door at stop
position during Broil/Bake
mode or right after cooking.
• Never cover the oven bottom
or cover an entire rack with
materials such as aluminum
foil.
• If the foil has already melted
onto the oven, it will not
affect the performance of the
oven.
• Check with gas supplier first
• Check with installer first
• Check that the regulator
valve is in the open position.
• If the regulator valve is
closed, rotate the lever to
open the valve.
Lever's closed Lever's open
position position
59