How To Install - Zeegma Draden Manual Del Usuario

How to install

EN
The steam cleaner is intended to clean bathrooms, toilets, kitchens, glassware,
mirrors and other smooth surfaces. Hot steam cleans dirt by dissolving greasy
and oily substances.
Before you use the product for the first time, please clean it in accordance
with the manual.
Accessories
1. Take a long spray nozzle, general spray nozzle and extension cord with spray.
Fix one of these elements; to do so, put it on the connector (1) and tighten
as showed by the arrow on the nozzle.
2. Install the sprayer with round brush and sprayer with curved spray on the
long spray nozzle or extension cord with spray. To do so, slip them in.
3. Install the window washing pad on the general spray nozzle. To do so, insert
its fastenings in nozzle valves.
How to use the product
1. Unscrew the valve (3) and pour clean water into the tank through the funnel.
The suggested amount of water is 250 ml, a larger amount of water may
cause the release of hot water instead of steam. Close the safety valve. When
using the product, it is forbidden to open the safety valve. It is permissible
only when the device is not supplied with power and is not hot.