After Use - Zeegma Draden Manual Del Usuario

2. Switch the device on, the indicator (7) will go on and the machine will start
heating up. After about three minutes, the device will be hot enough. When
it happens, the indicator (7) will go off. Press the button on the body to
release steam.
You can easily assemble and disassemble the product accessories. The equipment
may by used to clean doors, windows, floors and clothes.

After use

After you have used the product, unplug it and pour water remains out.
How to clean and maintain
To prolong the life of the device, please follow the cleaning and maintenance
guidelines.
• Use this device in accordance with intended use and guidelines in the manual.
Roll up the feeder cable after every use.
• When the device cools down completely, unscrew the safety valve and pour
water remains out. Clean the tank and let it dry off.
• Insert all set components back into the packaging. Store them in a dry and
well-ventilated area.
To fill the tank in, use a regular tap water. If the water in the place of your
residence is hard, using tap water may lead to early scaling of the steam cleaner
and in effect shorten its life. This being the case, fill the product with distilled
water.
After every use, empty the water tank not to let scale accumulate.
Do not add any liquids to the tank and do not use clothes drier water, aromatic
water or softened water, fridge water, AC water and rainwater. They contain
organic waste and mineral elements which, when heated, may react chemically
and damage the spray, cause brown dirt and lead to early wear of the equipment.
The use of prohibited types of water will invalidate the manufacturer's guarantee.
Do not use an abrasive sponge to clean the device. The device must be cleaned
properly after every tenth use.
EN