Kenwood CH250 Manual De Instrucciones página 4

Direct serve attachment
Never remove the lid until the
G
cutting disc has completely
stopped.
Never use your fingers to push food down
G
the feed tube. Always use the pusher
supplied.
Do not use excessive force to push food
G
down the feed tube – you could damage
the attachment.
Avoid contacting moving parts. Keep
G
fingers out of the discharge opening.
before plugging in
Make sure your electricity supply is
G
the same as the one shown on the
underside of the appliance.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
time
Wash the parts: see 'cleaning'.
key
1
bowl
2
cord storage
3
power unit
4
'safety' interlock
5
spatula
Food chopper
6
lid
7
speed selector
8
oil feeder cup
9
upper knife blade
bk
lower knife blade
Direct serve attachment (if
supplied)
bl
pusher
bm
direct serve lid
bn
on/off lever
bo
food outlet
bp
reversible slicing/grating disc
bq
direct serve adaptor
to use your food
chopper
The knife blade unit comes in 2
parts, a lower and an upper blade.
For coarser chopping use the
G
lower blade on its own.
For finer chopping or pureeing use
G
both blades together. This will also
give a faster result. To use both
blades fit the upper blade onto the
lower blade and turn anti-
clockwise to locate in place
Take care as the blades are sharp.
Note: After processing food, the
upper blade may disengage from
the lower blade. This is normal as
the blade assembly is designed to
be loose fitting to ease separation
after use.
1 Fit the bowl
unit, then turn clockwise to lock
into place
2 Fit the blade assembly into the
bowl.
4
1
onto the power
3
.
2
.